Technical Parameters:
Parameter item | CS350CNC-O（高速） | |
Sawing range | ◎ | φ115 mm |
□ | 110×110mm | |
┗ | 110×110mm | |
150×60mm | ||
适用锯片 | 外径φ355～φ400内孔φ32 销孔2φ11-PCD63 | |
主电机 | 4.0Kw | |
额定压力（液压） | 4MPa | |
机器外形尺寸 | 2200×1100×2200mm | |
送料伺服马达 | 1KW | |
送料长度 | 0-1000伺服马达连续循环动作 | |
液压泵马达 | 3HP | |
Performance characteristics:
※ Hydraulically driven, powerful knife, no climbing.
※ High-speed motor is used to drive the saw blade, which is specially used for non-ferrous metal cutting, and the cutting end surface is smooth without burr.
※ The vertical slide adopts oily ball type linear guide, which is light and easy to wear.
※ Servo motor feeds with ball screw, feeding accuracy is extremely high, can reach 0.1mm.
※ PLC, touch screen control, simple operation, labor saving.
※ The feeding and clamping pressures can be controlled separately, especially suitable for thin-wall pipe cutting to ensure that the deformation caused by clamping is minimized on the basis of non-skid.
※ There are no defects such as burrs or flanging on the cut surface.
※ The original imported alloy steel saw blade can be attached, and the tooth can be used continuously after being worn, and the cost of consumables is low.